MrFierceGod Posted May 17, 2019 Report Share Posted May 17, 2019 Is this going to be updated for the errors reported on IPS?? Quote Link to comment Share on other sites More sharing options...
MrFierceGod Posted May 20, 2019 Report Share Posted May 20, 2019 This is not working right for CiC at least when a member signs up using twitter, it sends a auto welcome (all the options you have enabled for the welcome) Then after they validate, it then sends another auto welcome (again, in any options you have enabled for the welcome) i understand this is a free app, but on IPS we have tried to tell you this numerous times (not only me, but others to) that the auto welcome is malfunctioning Can you plz let us know if this is unsupported or are you just working on your paid apps first?? ( i really don't want to just disable twitter as a sign up, due to lot's of members only using this option to log in and and don't want to inconvenience them as it was already hard to retain sign ups) i would like to know so i can either disable it or continue to be patient 1000's of admins use this free file, and i am sure not all are reporting the mishap as i believe this may just be a CiC issue? Quote Link to comment Share on other sites More sharing options...
Management Michael Posted May 30, 2019 Author Management Report Share Posted May 30, 2019 It looks like there is a reply on the IPS forums already, so I'll assume you've seen that already. I'll have a patch to test soon. Quote Link to comment Share on other sites More sharing options...
MrFierceGod Posted June 5, 2019 Report Share Posted June 5, 2019 you told everyone that you were still moving so replies will be delayed with no set time frame as to when you would be full force again and no, i was the last one to post in the auto welcome section, so i don't see where you say a patch will be released soon i do see where you said to some one that a FTP patch could be tested but ok and looking forward to patch when ever you are free to do it again, i fully understand this is a free resource and appreciate all you are doing for it Quote Link to comment Share on other sites More sharing options...
Management Michael Posted June 10, 2019 Author Management Report Share Posted June 10, 2019 On 6/5/2019 at 9:01 PM, MrFierceGod said: again, i fully understand this is a free resource and appreciate all you are doing for it Still not good enough ;) There's been quite a delay for a lot of people and I do apologies you've had to wait so long. I'll get in contact soon with some test patches I've looked into. MrFierceGod 1 Quote Link to comment Share on other sites More sharing options...
[USRF]Sledge Posted August 2, 2019 Report Share Posted August 2, 2019 On 12/19/2017 at 11:33 AM, [USRF]Sledge said: Bad thing is we like to get a post in a topic (new topic is not working either). Any ideas? Hey Michael, this issue has arisen again in the latest version. Can't get it to work to either create a topic and/or append to an topic. Quote Link to comment Share on other sites More sharing options...
[USRF]Sledge Posted August 13, 2019 Report Share Posted August 13, 2019 Hi Michael, just saw the banner above the website and wish you and your family all the best! Michael 1 Quote Link to comment Share on other sites More sharing options...
Management Michael Posted August 15, 2019 Author Management Report Share Posted August 15, 2019 On 8/2/2019 at 2:31 PM, [USRF]Sledge said: Hey Michael, this issue has arisen again in the latest version. Is it possible to get admin access to first check over any obvious settings or issues there? Quote Link to comment Share on other sites More sharing options...
Mesharsky Posted August 15, 2019 Report Share Posted August 15, 2019 Can you please do update for chatbox+ as well? Quote Link to comment Share on other sites More sharing options...
[USRF]Sledge Posted August 16, 2019 Report Share Posted August 16, 2019 23 hours ago, Michael said: Is it possible to get admin access to first check over any obvious settings or issues there? Well, not my preference of course, but I'm sure we can arrange something if really required Quote Link to comment Share on other sites More sharing options...
Management Michael Posted September 4, 2019 Author Management Report Share Posted September 4, 2019 On 8/16/2019 at 3:36 PM, [USRF]Sledge said: Well, not my preference of course, but I'm sure we can arrange something if really required You could take some screenshots of the auto welcome settings if you prefer? Quote Link to comment Share on other sites More sharing options...
Management Michael Posted October 10, 2019 Author Management Report Share Posted October 10, 2019 I've released a new version of the Auto Welcome application that includes some bug fixes and better integration with social media signups. Quote Link to comment Share on other sites More sharing options...
Mariusz Posted September 7, 2020 Report Share Posted September 7, 2020 Sorry, but I'm new to this whole thing. I don't know how to manually install this to my IPS 4.5? Can somebody please help? Quote Link to comment Share on other sites More sharing options...
Butterfly Pixel Posted September 9, 2020 Report Share Posted September 9, 2020 Hi, how can we manually upgrade the Auto Welcome plugin ? It's not available on the market place so how can we do with the new version 4.5.2 ? Thanks Quote Link to comment Share on other sites More sharing options...
RocketFoot Posted September 9, 2020 Report Share Posted September 9, 2020 (edited) 3 hours ago, Butterfly Pixel said: Hi, how can we manually upgrade the Auto Welcome plugin ? It's not available on the market place so how can we do with the new version 4.5.2 ? Thanks I just saved my data to a notepad and deleted the app. Then just manually install the new one for 4.5 and re-add your data. Edited September 9, 2020 by RocketFoot Quote Link to comment Share on other sites More sharing options...
Management Michael Posted September 10, 2020 Author Management Report Share Posted September 10, 2020 9 hours ago, Butterfly Pixel said: how can we manually upgrade the Auto Welcome plugin ? It's not available on the market place so how can we do with the new version 4.5.2 ? If you click on the application settings, can you see the "Upload a new version" ? Quote Link to comment Share on other sites More sharing options...
Butterfly Pixel Posted September 10, 2020 Report Share Posted September 10, 2020 Hi, thank you for your answer. It's strange, i don't have a lot of possibility... See my video, no upload new version : Regards, Olivier Quote Link to comment Share on other sites More sharing options...
Butterfly Pixel Posted September 10, 2020 Report Share Posted September 10, 2020 Hi, answer from support invision : Quote Hello, You cannot upgrade a marketplace app that is not in the marketplace manually. You can upgrade an app which has not been installed from the marketplace manually. So you would need to contact the author of that item on this. Kind Regards, Marc Stridgen Any reason why you don't push the new version to marketplace ? Thanks, Olivier Quote Link to comment Share on other sites More sharing options...
Management Michael Posted September 15, 2020 Author Management Report Share Posted September 15, 2020 On 9/11/2020 at 2:12 AM, Butterfly Pixel said: Any reason why you don't push the new version to marketplace ? See the IPS Marketplace note here - https://www.devfuse.com/forums/topic/12381-ipboard-45-update/ Quote Link to comment Share on other sites More sharing options...
UtOpiK Posted September 23, 2020 Report Share Posted September 23, 2020 Hello, When I try to update I have this error message : Could you help me to solve it please ? Thanks Quote Link to comment Share on other sites More sharing options...
Management Michael Posted September 23, 2020 Author Management Report Share Posted September 23, 2020 4 hours ago, UtOpiK said: Could you help me to solve it please ? Can you open applications/autowelcome/setup/upg_100201/upgrade.php Find: \IPS\Db::i()->insert( 'autowelcome_members', array( 'welcome_member_id' => $member['member_id'], 'welcome_sent' => 1, ) ); Replace With: \IPS\Db::i()->insert( 'autowelcome_members', array( 'welcome_member_id' => $member['member_id'], 'welcome_sent' => 1, ), TRUE ); And try re-running the upgrade again? Quote Link to comment Share on other sites More sharing options...
Square Wheels Posted September 23, 2020 Report Share Posted September 23, 2020 Hi, I'm using 2.6.1, but it's not making a post. I have the delay turned off. I didn't make any configuration changes after upgrading. Any suggestions? Thanks Quote Link to comment Share on other sites More sharing options...
UtOpiK Posted September 25, 2020 Report Share Posted September 25, 2020 On 9/24/2020 at 1:37 AM, Michael said: Can you open applications/autowelcome/setup/upg_100201/upgrade.php Find: \IPS\Db::i()->insert( 'autowelcome_members', array( 'welcome_member_id' => $member['member_id'], 'welcome_sent' => 1, ) ); Replace With: \IPS\Db::i()->insert( 'autowelcome_members', array( 'welcome_member_id' => $member['member_id'], 'welcome_sent' => 1, ), TRUE ); And try re-running the upgrade again? Hello, Thanks for your help. Unfortunnately, same issue after upgrade.php modification. Any other idea ? Thanks again. Quote Link to comment Share on other sites More sharing options...
UtOpiK Posted September 25, 2020 Report Share Posted September 25, 2020 I've change this line directly upload file (tar archive). But after update all my admin panel was broke (no theme / css). So I've restore BDD & file to go back to a "normal" situation. Hi you have any idea... thanks ! Quote Link to comment Share on other sites More sharing options...
alexasigno Posted November 2, 2020 Report Share Posted November 2, 2020 Yep same, I tried the code change above, but still get the following error: Sorry, you do not have permission for that! 1S111/1 Duplicate entry '2' for key 'PRIMARY' Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.